Can-Am Maverick X3 Accessories That Caught Our Eye in 2017

Can-Am Maverick X3

When the Can-Am Maverick X3 arrived, we were waiting to take possession of our X3 X rs and looking at ways to make it our own. This roundup preserves the accessories that caught our attention in 2017, from suspension and protection to audio, communications and styling. It is a snapshot of that period: prices, availability and model fitment have changed. Confirm the exact year, width and configuration of your X3 before ordering any part.

Can-Am Maverick X3 X rs
TMW Offroad flying high in their Can-Am Maverick X3 X rs

Suspension, steering and protection

Shock Therapy Ride Improvement System

Shock Therapy developed its Ride Improvement System to address the stock X3’s harshness in small chop, rear bucking in whoops and bottoming concerns. Its approach combined suspension tuning and spring setup rather than treating one symptom in isolation. Read our Maverick X3 X rs Ride Improvement System coverage for the original details and consult Shock Therapy for current applications.

CAN_AM MAVERICK X3 BILLET PROOF RADIUS ROD PLATE WITH TOW RING
CT RACE WORX CAN-AM MAVERICK X3 BILLET PROOF RADIUS ROD PLATE WITH TOW RING

CT Race Worx radius rod plate with tow ring

CT Race Worx’s billet plate and recessed tow ring were designed to strengthen the rear radius rod mounting area and add a recovery point. The 2017 design used a 6061-T6 aluminum plate and a separate 7075-T6 tow ring. Check the manufacturer’s recovery instructions and vehicle fitment before use.

S3 MAVERICK X3 X RS HD HIGH CLEARANCE LOWER RADIUS RODS
S3 MAVERICK X3 X RS HD HIGH CLEARANCE LOWER RADIUS RODS

S3 Powersports high-clearance radius rods

These arched lower radius rods targeted clearance under the original X3 X rs while replacing the stock links with billet aluminum pieces. The shape was intended to reduce snagging in uneven terrain. Verify rod length and the suspension configuration before choosing replacements.

CAN-AM MAVERICK X3 LOCKER KIT
CAN-AM MAVERICK X3 LOCKER KIT

Halo Locker front differential kit

The Halo Locker offered an electronically actuated locking option for early Maverick X3 owners. Its 2017 kit used a pin-style mechanism with associated differential components. Differential compatibility and installation requirements deserve close attention on later X3 models.

Factory UTV Can-Am X3-XRS UHMW Trailing Arm Guards
Factory UTV Can-Am X3-XRS UHMW Trailing Arm Guards

Factory UTV trailing arm guards

Factory UTV’s UHMW guards covered the exposed trailing arms on the X3 X rs. The slippery plastic surface was intended to help the arms slide over rocks and protect them from trail impacts. Confirm the guard shape matches your trailing arms.

Maverick X3 Long Travel Kit
HCR Racing CAN-AM Maverick X3 X RS OEM Factory Replacement Kit/ XDS Long Travel Kit

HCR Racing OEM replacement and long-travel kit

HCR offered an OEM-width replacement package for the 72-inch X3 X rs and a long-travel conversion for 64-inch X ds models. Those are distinct applications, so the starting model matters. See our original HCR Maverick X3 suspension report and consult HCR Racing for current fitment.

Cab, visibility and communication

SDR Motorsports Can-Am Maverick X3 Full Doors
SDR Motorsports Can-Am Maverick X3 Full Doors

SDR Motorsports full doors

SDR’s Hi-bred doors replaced the early X3’s factory door arrangement with a full-height panel and a single-pivot hinge design. They also brought a more finished look to the side of the vehicle. Door and cage fitment can vary with body style and accessories.

Mobile Radio and Intercom Mount for Can-Am Maverick X3
Mobile Radio and Intercom Mount for Can-Am Maverick X3

Rugged Radios intercom and radio mount

Rugged Radios offered a bolt-in X3 mount for the RRP360, 660 and 686 intercoms and RM60 mobile radio of the period. A clean communications installation is particularly useful when riding with a group. Check the dimensions of a current radio or intercom before assuming it fits this older bracket; Rugged Radios lists its current vehicle-specific options.

Can-Am Maverick X3 Plug & Play Turn Signal System
Can-Am Maverick X3 Plug & Play Turn Signal System

XTC Power Products plug-and-play turn signals

XTC’s original X3 system connected to the vehicle harness and used the factory rear lights as turn indicators. The kit also included a dash switch for hazards. Wiring and lighting requirements depend on the vehicle and where it is operated; check XTC Power Products for the kit that matches your model year. For a more recent lighting option, see our X-LITE Chase Light Bar overview.

Can-Am Maverick X3 Half Windshield
Super ATV Can-Am Maverick X3 Half Windshield

SuperATV half windshield

A half windshield offered some deflection of wind and trail debris while leaving the upper cab open. SuperATV showed a polycarbonate version for the early X3. Check its material, mounting points and compatibility with roofs and mirrors before choosing a current SuperATV windshield.

Rogue Powerscreen for the Can-Am Maverick X3
Rogue Powerscreen for the Can-Am Maverick X3

Rogue Innovations Powerscreen

Rogue’s mesh Powerscreen provided another approach to front cab protection. It emphasized airflow and visibility in dusty, hot conditions, though a mesh screen will not seal the cab like a solid windshield. The pictured product reflects what was offered in 2017.

SSV Works MRB3 Bluetooth Media Controller
SSV Works MRB3 Bluetooth Media Controller

SSV Works MRB3 audio controller and dash mount

The X3-DM3 dash kit positioned the MRB3 Bluetooth media controller at the top center of the X3 dash. It was an early step toward a fuller X3 audio system. Our SSV Works Maverick X3 audio coverage shows how the controller fit into a larger system.

Beard Seats for Maverick X3
Beard Seats for Maverick X3

Beard Seats for the Maverick X3

BRP offered these Beard Seats with a hard shell, sculpted foam and marine-grade vinyl for additional occupant support. Seat and harness choices need to be considered together, with mounting hardware and occupant fit checked carefully.

Powertrain, tires and style

Empire Industries Can-Am Maverick X3 Exhaust
Empire Industries Can-Am Maverick X3 Exhaust

Empire Industries slip-on exhaust

Empire Industries displayed a stainless-steel slip-on exhaust that exited at the factory location. The original listing also mentioned a separate catalyst-delete pipe. Exhaust configuration and emissions requirements vary, so check the current product details and rules that apply where you ride.

ITP Ultracross Tire Mounted on Tsunami Beadlock Wheel
ITP Ultracross Tire Mounted on Tsunami Beadlock Wheel

ITP Ultracross R-Spec tires and Tsunami beadlocks

The Ultracross R-Spec’s non-directional tread and the Tsunami beadlock wheel formed one of the tire-and-wheel combinations we considered for our new X3. The open tread was aimed at varied terrain including desert and slickrock. Verify tire size, wheel offset, bolt pattern and load ratings for your machine.

STM Rage 4 Can-Am Maverick X3 Primary Clutch
STM Rage 4 Can-Am Maverick X3 Primary Clutch

STM Rage 4 primary clutch

STM’s billet Rage 4 was an aftermarket primary-clutch option with adjustable cam-arm tuning for stock or modified early X3s. Clutch selection depends on engine setup, tire size and riding conditions; verify current specifications before changing the drivetrain.

Assault Industries Hellfire Front Grill
Assault Industries Hellfire Front Grill

Assault Industries Hellfire grille

The Hellfire front grille gave the original Maverick X3 a different look while replacing its stock plastic grille. Our Assault Industries Maverick X3 accessories report covers the grille and other period parts. Check current styling and fitment through Assault Industries.

From the wish list to the build

This was the list we assembled before our X3 arrived, not a test of every part pictured. To see how we equipped the vehicle after delivery, read the Phase One Maverick X3 build. Our Maverick X3 review covers the vehicle itself, while the X3 model overview provides more background.