Holz Racing Can-Am Commander 1000 X Race Build

Can-Am Commander 1000

Mark Holz transformed a mostly stock 2011 Can-Am Commander 1000 X into a WORCS-ready race machine using bolt-on parts from Holz Racing Products, Motoworks and DWT.

Mark Holz of Holz Racing Products was already an experienced UTV racer when he switched to the Can-Am Commander platform for the 2011 season. After competing successfully in the WORCS series for several years, Holz chose a new 2011 Can-Am Commander 1000 X for his latest race build.

What made this Commander particularly interesting was its relatively straightforward approach. Instead of building a highly modified engine or completely replacing the factory chassis, Holz retained much of the original vehicle and concentrated on suspension, clutching, exhaust, protection and driver safety.

Holz Racing Products Can-Am Commander 1000 X race build
Mark Holz’s 2011 Can-Am Commander 1000 X race build.

A Mostly Stock Can-Am Commander Race Build

The Commander retained its stock Rotax engine, intake and fuel-management system. Holz Racing tuned the clutching, while a Motoworks SR4 G2 exhaust system improved exhaust flow and gave the Commander a more aggressive sound.

The major transformation came from the Holz Racing Products +3-inch long-travel suspension. The stock FOX Commander X shocks were retained but revalved by Holz Racing. HRP 2.5-inch coil spring adapters and H&R springs completed the suspension package.

Heavy-duty tie rods, rock sliders and a full skid plate helped prepare the Commander for the demands of WORCS racing. DWT Sector wheels and 26-inch DWT Moapa tires provided the connection to the terrain.

Mark Holz racing a Can-Am Commander 1000 X
The Holz Racing Commander combined factory components with carefully selected racing upgrades.

Race Chassis and Safety Equipment

Holz Racing fabricated a custom roll cage and full doors for added protection. Inside, a Sparco racing seat was installed on a custom HRP seat mount and paired with MasterCraft five-point restraints.

An aluminum roof, prerunner-style front and rear bumpers and an HRP bed-delete kit reduced unnecessary bulk while giving the Commander a purposeful race-car appearance. A fire extinguisher mount and Joe’s Racing mirror completed the competition-focused cockpit.

Holz Racing Commander Specifications

  • 2011 Can-Am Commander 1000 X
  • Stock engine
  • Stock intake
  • Stock fuel management
  • Holz Racing-tuned clutching
  • Motoworks SR4 G2 exhaust
  • Holz Racing Products +3-inch long-travel suspension
  • Stock FOX Commander X shocks with Holz Racing valving
  • Holz Racing Products 2.5-inch coil spring adapters
  • H&R 2.5-inch springs
  • Holz Racing Products heavy-duty tie rods
  • 14-inch DWT Sector wheels
  • 26×9-inch DWT Moapa tires
  • Holz Racing custom roll cage
  • Holz Racing custom full doors
  • Sparco racing seat
  • Holz Racing custom seat mount
  • MasterCraft five-point restraints
  • Holz Racing Products rock sliders
  • Holz Racing Products skid plate
  • Holz Racing Products aluminum roof
  • Holz Racing Products prerunner front bumper
  • Holz Racing Products prerunner rear bumper
  • Holz Racing Products bed-delete kit
  • Holz Racing Products fire extinguisher mount
  • Joe’s Racing 14-inch mirror

Holz Racing Commander Photo Gallery

Holz Racing Products prerunner bumper on the Can-Am Commander
Holz Racing Products prerunner front bumper.
Holz Racing Products Can-Am Commander bed-delete kit
The HRP bed-delete kit gave the Commander a lighter, race-inspired profile.
Holz Racing Products Can-Am Commander plus-three-inch long-travel suspension
Holz Racing Products +3-inch long-travel suspension.
Motoworks dual exhaust on the Holz Racing Can-Am Commander
Motoworks SR4 G2 exhaust system.
Mark Holz driving the Can-Am Commander 1000 X race build
Holz Racing Can-Am Commander competing in WORCS racing
Mark Holz racing his 2011 Can-Am Commander 1000 X
Holz Racing Products Can-Am Commander race UTV

Build Sponsors

The 2011 race program was supported by Can-Am, Motoworks, DWT, Holz Racing Products, FOX Racing, H&R Springs, Motul, K&N Engineering, Utendorfer Graphics, Kroyer Racing Engines and UTV Underground.

For more information about the components used on this Commander, visit Holz Racing Products.

Why This Commander Build Still Stands Out

This machine demonstrated how the original Can-Am Commander could be turned into a capable race UTV without extensive engine modifications. By focusing on suspension tuning, chassis protection, driver safety and a handful of proven performance upgrades, Holz Racing created a competitive build while retaining much of the Commander’s factory foundation.

 

For the original platform’s model years, packages and specifications, see our first-generation Can-Am Commander guide (2011–2020). Explore more period custom vehicles and project features in our UTV of the Month archive, covering 2008–2016.