HID Replacement Lights Kawasaki Teryx

Stock Halogen Light on the left and HID Replacement Light on the right.

Information:

The HID light kit comes with wire harness, ballasts and new HID bulbs. It is a plug and play light replacement for the Kawasaki Teryx.

This kit utilizes 6000k 35 watt bulbs for the whitest in white light that put out six times the amount of light of the factory halogen lights. The lights fit directly into the factory headlight housings.

HID lights also use much less power than factory halogen bulbs. Each HID ballast draws only 3.8 amps.

Installation:

Remove headlight cover (5 phillips screws)

Disconnect wire harness (white triangle) and then pull light out.

Remove light fixture from black cover – two 8mm bolts on the side and the phillips light adjustment screw.

Remove wire connector, then pull off rubber boot.

Remove stock halogen bulb and replace with new HID bulb.  Then replace boot and put grommet on the outside of the boot.

Mount ballast using double sided tape and zip ties.

Conclusion:

Combined HID (left) and Halogen (right)

Single Halogen only

Single HID only

As you can see, the HID light is much brighter and whiter.

Other Photos:

Contact Info:

Burke Moto Pros

Phone: (408) 421-6359

Website: www.burkemotopros.com