| Product Review
Information:I run with my airbox lid off on my Kawasaki Teryx. The performance is good, but the filter gets dirty so quick, the benefits aren’t worth the hassle of a dirty filter after just a short bit of riding in dusty conditions. I had used an airbox cover from EHS Racing on a few of my ATVs in the past, and was very happy with the results. I checked the EHS Racing website, and to my dismay, there was nothing listed for the Kawasaki Teryx. Not one to give up that easily, I picked up the phone and talked to Eric at EHS Racing. Eric didn’t have anything made yet, but said he would get right on it. A week later, the airbox cover was shipped. The cover takes a little bit of work to cut out the center section of the lid and drill a few holes, but it took me about 1/2 an hour. Installation:
Mark the area to be cut. I used a jig saw. Cut does not need to be perfect (obviously). I did grind down a few of the vertical pieces on the inside so the nuts would sit flush. Bolt it all up and you are done! Contact Info:EHS Racing Website: www.ehsracing.com |
No Comments