SuperATV RackBoss 2.0 for Polaris RZR XP 1000

Polaris RZR XP 1000 with SuperATV RackBoss 2.0 rack and pinion

SuperATV introduced its original RackBoss heavy-duty rack and pinion for the Polaris RZR XP 1000 in 2015 as a stronger replacement for the factory steering rack. The product has since evolved into the SuperATV RackBoss 2.0 rack and pinion, which adds a dual-bushing design, serviceable grease fittings and several heavy-duty tie-rod options.

Why Upgrade the RZR XP 1000 Steering Rack?

Large tires, hard impacts and repeated use in rocks, mud or rough desert terrain place additional loads on a UTV’s steering components. As the factory rack and bushings wear, the driver may notice free play, inconsistent steering response or movement in the steering system.

RackBoss 2.0 is designed as a complete replacement steering assembly for owners who need to replace a worn factory rack or want stronger components for a modified RZR XP 1000.

SuperATV RackBoss 2.0 Features

  • X24 dual-PTFE-bushing design supports the rack at both ends
  • Housing is 65 percent larger than the factory housing
  • SuperATV claims more than 50 percent less wear than OEM after 15,000 test cycles
  • Grease fitting allows the rack gears to be serviced
  • Includes inner boots, steering stops and installation hardware
  • Rebuildable inner tie-rod ends
  • Choice of swaged steel-tube, solid steel-bar or billet-aluminum tie rods
  • Bolt-on installation using the factory mounting location

SuperATV RackBoss heavy-duty rack and pinion for Polaris RZR XP 1000

Three Tie-Rod Options

SuperATV offers RackBoss 2.0 with three tie-rod configurations. The swaged steel-tube version is the lightest-duty option and is intended as a practical upgrade from the stock assembly. Solid steel-bar tie rods add strength for larger tires, rock crawling and demanding trail use. Billet-aluminum hex tie rods combine a lighter aluminum construction with oversized rod ends for high-end builds.

The solid-steel and billet-aluminum versions use 3/4-inch outer tie-rod ends and rebuildable inner joints. The swaged-tube version uses 14 mm outer ends and smaller 14 mm rod threads.

Polaris RZR XP 1000 Fitment

  • 2014–2023 Polaris RZR XP 1000
  • 2014–2023 Polaris RZR XP 4 1000

The assembly replaces Polaris steering-rack part numbers 1824205, 1824469, 1823984, 1824339 and 1824747. Buyers should still confirm their exact model, year and tie-rod selection with SuperATV before ordering.

Important: This fitment range does not include the redesigned 2024-and-newer RZR XP 1000. It also should not be assumed to fit XP Turbo, Turbo R, Pro XP, Pro R or Pro S models, which use model-specific steering components.

Installation and Alignment

RackBoss 2.0 is designed as a bolt-on replacement, but installation requires removing the front wheels and tie rods, disconnecting the steering shaft and removing the original rack. After installation, the front toe should be checked and adjusted before the vehicle is driven.

SuperATV provides model-specific installation instructions and an installation video on the product page. Its current warranty information lists one-year coverage against manufacturing defects for RackBoss 2.0, subject to the company’s complete warranty terms.

Original RackBoss vs. RackBoss 2.0

The product shown in this 2015 announcement was the first-generation RackBoss. Its larger housing, heavier rack gear and reinforced mounting hardware addressed common durability concerns on modified RZR XP 1000s. RackBoss 2.0 retains the heavy-duty replacement concept while adding support at both ends of the rack, grease fittings and updated tie-rod choices.

For more information about how the XP 1000 fits into the evolution of Polaris sport side-by-sides, see our history of the Polaris RZR.

See current RackBoss 2.0 specifications, options and fitment at SuperATV.