The Baja Designs OnX6+ light bar was promoted in 2018 as offering up to 69% more output than the previous OnX6 generation. The announcement also highlighted Battery Management Technology, or BMT, which adjusts light output in response to the vehicle’s electrical supply.
Understanding the original brightness claim
The “up to 69%” figure was Baja Designs’ comparison with its previous-generation product, not a universal increase for every installation. The original announcement quoted 12,460 lumens without identifying the bar length associated with that figure. It should not be read as the output specification for the pictured 30-inch bar or every OnX6+ model.
When comparing lights, use the exact part number, length and beam pattern. Total lumens alone do not show how much useful light reaches a corner or a distant section of trail.
How Battery Management Technology works
Baja Designs’ BMT explanation says its circuitry gradually adjusts output when charging-system voltage falls below 13.5 volts. Additional accessories, such as stereos and compressors, can contribute to that drop. The intent is controlled dimming rather than low-voltage flickering.
BMT is not a substitute for a correctly sized wiring harness, fuse or adequate charging capacity. Review the electrical requirements of the selected bar together with the vehicle’s other accessories.
OnX6+ beam patterns in the original announcement
- Driving/Combo: combined 42-degree wide-driving optics with a 6-degree spot for nearby coverage and distance.
- Wide Driving: used a broad, flattened 42-degree beam for wider coverage; the announcement also listed an amber option.
- High Speed Spot: used a narrower 6-degree beam intended to supplement wider lights.
- Racer Edition Spot: used a focused 4-degree beam for distance, also intended to work with wider coverage.
These are the original pattern descriptions. Confirm the optics and output for the current part number rather than assuming an older product announcement covers every revision.
Choosing a light bar for a UTV
Measure the mounting span and check roof, windshield and bracket clearance. Then compare the selected bar’s wattage and amperage with the vehicle’s available electrical capacity. Use the official OnX6+ product listing for current configurations and specifications. Explore more accessory coverage in our UTV product news archive.



















