SuperATV has expanded its growing selection of CFMOTO ZFORCE Z10 accessories with Atlas Pro 1.5-inch forward-offset A-arms. The high-clearance suspension upgrade is designed for owners who want stronger front control arms, additional ground clearance and room for larger tires without installing a traditional lift kit.
The new SuperATV Atlas Pro A-arms for the CFMOTO ZFORCE Z10 fit both the two-seat Z10 and four-seat Z10-4 beginning with the 2026 model year.
Built for the ZFORCE Z10
The CFMOTO ZFORCE Z10 arrives with a strong performance foundation, including a 143-horsepower turbocharged three-cylinder engine, 64-inch width and double-A-arm front suspension. As owners begin building the platform for more demanding trail and mud use, the front suspension becomes a logical area to address—particularly when adding larger and heavier tires.
SuperATV builds the Atlas Pro arms from 1.5-inch-diameter steel tubing. Critical structural sections use quarter-inch-thick tube walls to provide additional strength where the arms receive the greatest loads. A UV-resistant powder-coated finish helps protect the steel from corrosion and trail damage.
SuperATV Atlas Pro A-Arms for CFMOTO ZFORCE Z10
More Clearance and a Longer Wheelbase
The new arms move the front wheels 1.5 inches forward. That offset increases the ZFORCE Z10’s wheelbase slightly while creating more clearance between the tires and the rear portion of the front wheel wells.
High-clearance bends also provide 1.5 inches of additional clearance beneath the arms. This can help the suspension pass over rocks, ruts and other trail obstacles that could contact straighter factory-style control arms.
According to SuperATV, the combination accommodates:
- Up to 32-inch tires with stock wheels
- Up to 35-inch tires with wheels having no more than 3.5 inches of backspacing
- No suspension lift required for the stated tire fitment
Tire fitment can still vary with wheel offset, tire construction, actual measured tire size, suspension setup and how aggressively the vehicle is driven. Owners moving to 35-inch tires should also consider the added rotating mass and leverage placed on the steering, wheel bearings, CV joints, brakes and drivetrain.
SuperATV Atlas Pro A-Arms for CFMOTO ZFORCE Z10
Adjustable Camber
SuperATV equips the Atlas Pro arms with adjustable pivot blocks. These allow the owner or installer to correct camber after changing ride height, tire size or suspension components.
The pivot blocks arrive preset to factory specifications, but alignment should be checked after installation and again after the suspension has settled. Proper camber and toe settings are important for predictable handling and even tire wear—especially with larger tires.
Ball Joint and Bushing Options
The Atlas Pro kit does not include bushings as standard equipment. Buyers can reuse the factory bushings or add SuperATV’s self-lubricating UHMW bushing kit. The optional kit includes the required bushings, sleeves and an installation press tool.
Owners who order the arms without optional ball joints must also transfer their original ball joints. SuperATV offers the arms with several preinstalled ball-joint choices, including heavy-duty, 300M Super Duty and rebuildable Keller ball joints. Selecting a preinstalled option eliminates the need to press the original ball joints out of the factory arms.
Who Are These A-Arms For?
This upgrade makes the most sense for a ZFORCE Z10 owner building around larger tires or regularly driving through rocks, deep ruts and other terrain where control-arm clearance matters. The forward offset provides additional tire room, while the heavier tubing is intended to better tolerate the increased loads associated with aggressive driving and oversized tires.
Owners retaining the original tire size can still benefit from the additional control-arm clearance and stronger construction, although the upgrade’s larger-tire capability would be less important.
SuperATV Atlas Pro A-Arm Features
- Fits 2026 and newer CFMOTO ZFORCE Z10 models
- Fits 2026 and newer CFMOTO ZFORCE Z10-4 models
- Moves the front wheels forward 1.5 inches
- Provides 1.5 inches of additional control-arm clearance
- Constructed from 1.5-inch-diameter steel tubing
- Quarter-inch-thick walls in critical structural sections
- Adjustable pivot blocks for camber correction
- Accepts factory or optional SuperATV bushings
- Multiple preinstalled ball-joint options available
- UV-resistant powder-coated finish
- Lifetime warranty against manufacturing defects for the original purchaser, subject to SuperATV’s warranty terms
Note: Ball joints and tie-rod ends are treated as wear items and are not covered by the A-arms’ lifetime warranty.
Availability
The Atlas Pro 1.5-inch forward-offset A-arms are available directly from SuperATV. Pricing varies according to the selected bushing and preinstalled ball-joint options.
Product specifications and tire-fitment claims were supplied by SuperATV. Photos courtesy of SuperATV.
